2025 Quarter 2 - UV+EB Technology

Home Tags 2025 Quarter 2

Figure 1. Blue Trace data: Collected at 75% power, 8 inches from the cure surface, peak irradiance value just over 400 mW/cm2. Red Trace data: Collected at 100% power, 2 inches from the cure surface, peak irradiance value is just under 800 mW/cm2.

Scotty, We Need More Power!

Figure 1. Fingerprint oils and high voltage are not a good pairing for high vacuum environments.

Vacuum 101 for Electron Beam Users

UV Binders for Li-ion Batteries: Part 2

Figure 3. Top view (a) and schematic cross-sectional view (b) of a Graphics Processing Unit (GPU). The High Bandwidth Memory (HBM) is stacked vertically and placed in close proximity to the GPU to optimize throughput. 6 The vias appear as vertical lines throughout the interposer which electronically connect the GPU and HBM to the substrate below.

Additive Manufacturing for Electronics Applications

Large-Area Nanopatterning at Smart Material Solutions

A New Chapter for PAMA: Strengthening the Future of Photopolymer Additive...

Photopolymer Week 2025 Provides Two Events in September

Automation for Photopolymer Optimization: Developments Toward Next-Generation Energy Materials

Figure 8. Toughening materials to improve flexibility and hardness.

Energy-Efficient Insulative Coatings for Battery Cell Applications

Beyond Dual Cure: Next-Generation Universal Black UV Monocoat

12 Page 1 of 2

- Advertisement -

The Official Publication of RadTech International North America
785.271.5801 | Peterson Media Group | publish@petersonmg.com
2150 SW Westport Dr., Suite 701, Topeka, KS 66614

Tag: 2025 Quarter 2