Home Articles

Articles

Improving Manufacture Efficiency with Water-Based UV-Curable Polyurethanes in Wood Coatings

PFA-Free Sharpie® Marker and Stain Resistance for UV-Cured Wood Floor Coatings

Figure 10. Adhesive strength as determined by 90-degree pull of the cathode face down on two-sided tape to give an average gF/20 mm value

UV Binders for Li-Ion Batteries: Part 1

In the 2023 Q2 edition of UV+EB Technology, an overview was provided of UV-/EB-based binders for Lithium-ion battery (LiB) applications as being a promising...

Figure 3. The FT-IR spectrum recorded at the initiation and end of the reaction

Developing Hydrophobic UV-Curable Clearcoats for Plastic Substrates Using Organic-Inorganic Hybrid Technology, Part 1

By Tahereh Hayeri (Neda), Coating Research Institute, Eastern Michigan University Editor’s Note: Coatings for plastic substrates are subject to challenges that can result in reduced...

Figure 4. PhotoDSC cure comparisons of Inherently Reactive UA1 and UA2 with TPO and BP/EHA Photoinitated Analogs

Inherently Reactive Urethane Acrylate Resins

By Don Herr, Linda Franceschini, Elaine Ruiz, Yuhong He, Brendan McGrail and Jeff Klang, Arkema-Sartomer BU The uses for solvent-free, 100% solids, liquid UV-curable materials...

- Advertisement -

The Official Publication of RadTech International North America
785.271.5801 | Peterson Media Group | publish@petersonmg.com
2150 SW Westport Dr., Suite 701, Topeka, KS 66614