Enews July 2025 - UV+EB Technology

Home Tags Enews July 2025

2025 Photopolymer Additive Manufacturing Alliance (PAMA) Workshop will be Held in...

BASF celebrates 10 years of TECH Academy

Kyocera Launches New Air-cooled UV LED Light Source “G7A Series”

Precise Measurement Occurs with the New UV Scan MACS

Arkema Implements the Net Zero Initiative Methodology to Measure Avoided CO₂...

Roland DGA Announces the Launch of Two New VersaSTUDIO Desktop Devices

UV Days 2025 Sets Standards with Technological Highlights and International Networking

Figure 1. Blue Trace data: Collected at 75% power, 8 inches from the cure surface, peak irradiance value just over 400 mW/cm2. Red Trace data: Collected at 100% power, 2 inches from the cure surface, peak irradiance value is just under 800 mW/cm2.

Scotty, We Need More Power!

Figure 3. Top view (a) and schematic cross-sectional view (b) of a Graphics Processing Unit (GPU). The High Bandwidth Memory (HBM) is stacked vertically and placed in close proximity to the GPU to optimize throughput. 6 The vias appear as vertical lines throughout the interposer which electronically connect the GPU and HBM to the substrate below.

Additive Manufacturing for Electronics Applications

A New Chapter for PAMA: Strengthening the Future of Photopolymer Additive...

12 Page 1 of 2

- Advertisement -

The Official Publication of RadTech International North America
785.271.5801 | Peterson Media Group | publish@petersonmg.com
2150 SW Westport Dr., Suite 701, Topeka, KS 66614

Tag: Enews July 2025