This is the next installment in the ABCs of UV Measurement and Process Control Series of columns. Bands (UV) It is human nature to categorize things. The electromagnetic (EM) spectrum is categorized from short, high-energy gamma rays to long, low-energy radio waves. Most people are familiar with the visible portion (+/- 400-750 nm) because of the associated colors we … [Read more...] about ABCs of UV Measurement & Process Control: Letters B-D
Measurement
UV-C Is Much More Than 10 Nanometers: Why the UV-C Band Demands Measurement
By Darrin Leonhardt, chief innovation officer and head of engineering, EIT 2.0 A UV curing line runs flawlessly for two years. Then the lamp supplier changes. The replacement units are the same wattage, the same lamp type, the same rated output. The radiometer reads within 2% of the original baseline. Three days into production, cure failures begin appearing downstream – … [Read more...] about UV-C Is Much More Than 10 Nanometers: Why the UV-C Band Demands Measurement
ABCs of UV Measurement & Process Control: Letter A
I was “volunteered” for this UV+EB Technology column journey in 2019. This column (number 30) is close to the same number of years I have been involved with UV technology. I still learn every day and get excited about new applications, while not forgetting the basic building blocks of UV, measurement and process control. This column will focus on the “ABCs” of UV measurement … [Read more...] about ABCs of UV Measurement & Process Control: Letter A
Count Everything: What Gets Measured, Gets Improved
In the 1999 baseball movie, For Love of the Game, there is an exchange between Kevin Costner (Billy) and Kelly Preston (Jane): Jane: Do you lose very much? Billy: I lose. I’ve lost 134 times. Jane: You count them? Billy: We count everything. In UV, we also need to count or measure everything because, as Lord Kelvin said, “If you cannot measure it, you … [Read more...] about Count Everything: What Gets Measured, Gets Improved
UV LED Measurement, Part 2: How Good is Good Enough?
Editor’s note: Part 1 of this column appeared in the Q3 2025 issue of UV+EB Technology and stressed the importance of using a measurement instrument optimized for the source. Many companies already have a radiometer for broadband (mercury) sources. In most cases, this is not the right tool for measuring UV LEDs. Only you can decide if the values on your broadband radiometer … [Read more...] about UV LED Measurement, Part 2: How Good is Good Enough?






