These patient-specific anatomical models represent an aneurysm in the abdominal part of the aorta, the main artery in the body. An uncoated model is shown at top and at bottom is a nearly-transparent thiol-ene-coated model.

3D-Printing Phantoms: Medical Anatomical Models Benefit from UV-Curable Coatings

Additive Manufacturing: Printing Area vs. Feature Size

Figure 4. Clear, gloss inkjet ink, matted with excimer, applied over a gloss flood coat.

Excimer and EB: A Different Approach to Gloss Control

Honey, Anything Interesting Happen at Work?

Figure 7. Pigmented Development #1

Improving Manufacture Efficiency with Water-Based UV-Curable Polyurethanes in Wood Coatings

Figure 4. Stained panels after IPA wipe

PFA-Free Sharpie® Marker and Stain Resistance for UV-Cured Wood Floor Coatings

Ken Vessey

In Memoriam: Ken Vessey

Figure 10. Adhesive strength as determined by 90-degree pull of the cathode face down on two-sided tape to give an average gF/20 mm value

UV Binders for Li-Ion Batteries: Part 1

Figure 3. The FT-IR spectrum recorded at the initiation and end of the reaction

Developing Hydrophobic UV-Curable Clearcoats for Plastic Substrates Using Organic-Inorganic Hybrid Technology,...

Figure 4. PhotoDSC cure comparisons of Inherently Reactive UA1 and UA2 with TPO and BP/EHA Photoinitated Analogs

Inherently Reactive Urethane Acrylate Resins

1...345...151Page 4 of 151